Getting Inky for Cardz 4 Galz #177

Welcome to the latest Cardz 4 Galz two week challenge!  Our host, Caz, picked Get Inky for the theme of #177.  When you finish here, I hope you will visit the challenge website to see the creations of the rest of the design team members.  

Here’s my Get Inky card:

 

, I know the picture is cut off but I gave this card to my great-niece on Monday for her 6th birthday so I can’t take another one.

My great-niece is currently obsessed with rainbows and unicorns. Her 6th birthday present is a pastel pink and purple unicorn hooded bathrobe. Therefore, I went with a rainbow birthday card.

Measurements:

  • The Gorgeous Grape base measures 5-1/2 by 8-1/2 inches, scored at 4-1/4 inches.
  • I used a black cardstock mat, and it measures 5-3/8 by 4-1/8 inches.
  • I started with a piece of white cardstock measuring 5-1/2 by 4-1/4 inches. After I had finished creating the rainbow, I trimmed it down to 5-1/4 by 4 inches. Then, I trimmed another piece of white cardstock for the inside to 4 by 5-1/4 inches.
  • Since I stamped a series of rainbow colors on the envelope flap, that’s about it for measurements.

Getting Inky:

  • I didn’t take pictures of the process of creating the rainbow colored clouds, but I do have pictures from a previous post using the same technique in Bermuda Bay.
  • I used a piece of window sheet film and cropped it with the cloud looking die from the basic borders die set. Then, I used the window sheet clouds as a stencil. Here are photos of this process using the stencil, a blender brush, and Bermuda Bay ink:
  • I did move the “clouds” as I worked my way up the white cardstock. I also blended very light areas using the dry blender brush.
  • The colors I used are Real Red, Pumpkin Pie, Daffodil Delight, Garden Green, Pacific Point, Starry Sky, and Gorgeous Grape.
  • Here’s my rainbow of clouds before I added anything else:

Happy Birthday:

 

  • I stamped the sentiment from Artfully Layered in Momento Tuxedo Black ink on white cardstock. Then I cropped it using one of the Tailored Made Tags dies. The hole punched with this die was exactly what I needed for the balloon strings.
  • I used my balloon punch and started punching 2021-2023 In Color Vellum and shimmery white cardstock.
  • Then, I started dry-fitting the balloons together. When I figured out the placement, I added white baker’s twine and dimensionals under some of the balloons.
  • I pulled all the twine strands through the hole in the sentiment tag and just tied a knot.
  • After I had it all adhered, I used just a couple of drops of white craft ink to add highlights to the balloons.
  • Next, I used the shadow stamp from Wildlife Wonder to stamp the rainbow colors on the envelope flap.
  • Finally, I punched a 1 inch circle of Gorgeous Grape DSP for the envelope seal.
  • With that, I’d finished this coordinated card, envelope, and envelope seal set.

Thank you for stopping by my blog!

Have a Peachy Day!

Sue

 

Colors Used:

 

 

Basic Papercrafting Supplies:

 

It’s July, 2022 ~ do you know what that means?  The new Holiday Mini-Catalog and Sale-a-Bration are in full swing!!  

Sale-a-Bration runs from July 1 to August 31, 2022.  This means you can earn FREE products for two months!   Take a look at these Sale-a-Bration products!!

Here’s a link to the new Holiday Mini-Catalog, which runs through January 4, 2023.  Click on the following image to open the catalog:

If you live in the U.S. and don’t already have a demonstrator, I’d be honored to work with you.

Do You Want to Place an Order?

Of course you do, especially since you can earn FREE products with a qualifying purchase!

If you are ordering less than $150.00, please use the host code shown. If you are ordering more than $150.00, please contact me first so you an get your stamping rewards!  Any order over $50 will earn a little surprise from me.

The HOST CODE through July 31, 2022 is UKDVYZSG.

 

Again, thank you for stopping by my blog today!  I appreciate your comments and your time.

Party Fun with the December IRBH!

Welcome to InKing Royalty’s December Blog Hop! During this year’s blog hops, we are having fun with our stamping favorites – our favorite themes for seasonal cards and projects. This month’s projects are all about party fun – festive gatherings like New Year’s, birthdays and other fun times. How fun! We are excited to share our creations with you today! After you read my post, I hope you’ll hop over to the next person on the list at the base of this post.

First and foremost – a great big HAPPY BIRTHDAY to our fearless leader, Brian King!  My party card for this blog hop just happens to be for a very special birthday! 

Here’s my card:

I’ve already posted cards made with the layering diorama dies and you can see one of those posts here. For that post, I created a faux shaker card, but did include multiple pictures of hos I layered the diorama die cuts. The Party Puffin card has three layers: white is adhered directly to the DSP, the Granny Apple Green is popped up on dimensionals, as is the Misty Moonlight layer. The double layer of dimensionals for the layering dies also means I need to use a double layer of dimensionals on the foremost puffin on the right and behind the cake.

Measurements:

  • While it probably would’ve been easier to create a tent fold card, I went with a side fold. Therefore, the Granny Apple Green base measures 11 inches by 4-1/4 inches, scored at 5-1/2 inches.
  • The piece of white cardstock for the back layering diorama mat measured 4 inches by 5-1/4 inches. I trimmed another piece of white cardstock to the same measurements for the inside of the card.
  • The Granny Apple Green cardstock measures 4 inches by 5-1/4 inches. The Misty Moonlight top layer measures 4-1/8 inches by 5-3/8 inches. Originally, I thought about using an embossing folder to give the Misty Moonlight cardstock some texture. Then, I decided I’d just randomly stamp the trio of candles on it instead. I did stamp off each time I stamped so the candles wouldn’t be too dark.
  • This Pattern Party Host 12 x 12″ DSP (designer series paper) stack is full of fun colors and patterns. Not into so much color? The reverse side of each of the 48 (yes, 48!!) sheets is black and white. All of those patterns are fabulous as well. Anyway, I trimmed the piece for the front of the card to 4-1/8 inches to 5-3/8 inches. I used a piece trimmed to 6 inches by 2-1/2 inches for the envelope flap.

What Else I Did:

  • I used quite a number of dimensionals on this card. Not as many as on the shaker card for which I included the link above, but dimensionals definitely hold this card together.
  • After stamping the puffins and the cake in Momento Tuxedo black, I fussy cut each piece. I’m getting better and a bit faster at fussy cutting. If you are left-handed, you understand why this is a big deal.
  • Since Pale Papaya is a color in the DSP, I decided to use the blends combo for the beak and feet of the puffins. I used the light Smoky Slate blend for the beak as well. I decided to color the candle flames in Pale Papaya as well
  • Then, I used the bullet end of the Granny Apple Green and Misty Moonlight blends for the cake and the party hat.
  • I stamped the sentiments for both the inside and the outside in Misty Moonlight. The outside sentiment is cropped using the rectangle stitched dies.
  • Since I thought some additional color was needed on the inside, I stamped 3 fishes around the sentiment. Even though the fish have a bow, somehow I thought it would be creepy to have the fish for a present for the birthday puffin.

Finishing Up:

  • After I had everything together and adhered, I wanted something else, but knew I needed something subtle. So, I used the fine tip glue pen to color the Misty Moonlight semi-circles and the Granny Apple Green part of the birthday hat. I couldn’t just stop and leave the cake alone and naked, so I all use the glue pen on the colored parts of the cake.

HINT: Make sure you allow the glue to completely dry before you try to move the card. I’ve been impatient with that before and it didn’t work well. Here’s a close-up of the DIY epoxy dots I created (thanks to Brian King’s fabulous idea!).

  • Finally, I trimmed the DSP on the envelope flap and punched a 1 inch circle to run through the XYRON create-a-sticker for the envelope seal. With that, I’d finished this very layered card, envelope, and seal coordinated set.

Thank you for stopping by today.  I hope you’ll hop along to the next stop on the blog hop, Jackie Beers at Blue Line Stamping There’s lots of inspiration to be found in this group – and you don’t want to miss it!

Thank you for hopping along with us. If you get stuck during the Blog Hop, please use this line-up as a guide:

    1. Brian King at Stamp with Brian
    2. Pam Morris at Tap Tap Stamp
    3. Renae Novak at Blessed by Cards
    4. Lynn Kolcun at Avery’s Owlery
    5. Sue Jackson at Just Peachy Stamping<<<— YOU ARE HERE
    6. Jackie Beers at Blue Line Stamping

Thanks for stopping by my blog today!

Have a Peachy Day!

Sue

Colors Used:

Supplies Used:

Basic Crafting Supplies:

 

Eden’s Garden Suite of Products

Pre-order Available Now!

This suite is gorgeous and #1 on my next order! However, you can purchase it now! Look at all the wonderful products in the suite collection!

EDEN'S GARDEN COLLECTION (ENGLISH)

Do you live in the U.S. and need a demonstrator? If so, I’d love to talk to you!

Do You Want to Place an Order?

Of course you do!

If you are ordering less than $150.00, please use the host code shown. If you are ordering more than $150.00, please contact me first so you can get your stamping rewards!  Any order over $50 will earn a little surprise from me.

The HOST CODE through December 31, 2021 is K4HSXP94.

Again, thank you for stopping by my blog today!  I appreciate your comments and your time.